Whirlpool ET20MK Install, properly, Level refrigerator-freezer, Remove sales labels, Clean it

Models: ET20MK

1 16
Download 16 pages 13.36 Kb
Page 4
Image 4
Install

Install

properly.,

.

 

1, Allow %” (.2 cm) space on each side and at top for ease of installation.

2.The refrigerator back can be flush against the wall.

3.If the refrigerator is to be against a wall, you might want to leave enough space so the door can be opened wider.

Level refrigerator-freezer.. .

Right to Raise;

Left to Lower

I, Remove base grille (see page 8).

2.To raise front, turn each screw to the right.

3.To lower front, turn each screw to the left.

4.Check with level.

Remove sales labels.. .

Remove the Consumer Buy Guide label and other inside labels before using the refrigerator. Any glue left can be taken off with rubbing alcohol.

Clean it...

Clean your refrigerator before using it. See clean- ing instructions on page 9.

Plug it in...

3-prong grounding type wall receptacle

Refrigerator

Power Cord

Recommended

Grounding Method

A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused electrical supply is required. It IS recommended that a separate circuit serving only this appliance be provided.

Do not use an extension cord. Use a receptacle which cannot be turned off with a switch or pull chain. See individual electrical requirements and

grounding instruction sheet in your literature package.

4

Page 4
Image 4
Whirlpool ET20MK manual Install, properly, Level refrigerator-freezer, Remove sales labels, Clean it, Plug it in