REFRIGERATOR CONTROL | POWER SAVING CONTROL | LIGHT SWITCH | FREEZER CONTROL |
Setting the controls...
Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for
IEFllCw!*Ton
1. Set the
TORCONTROL to 3.
2.Set the FREEZER CONTROL to B.
Changing the control settings...
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
Give the refrigerator time to cool down
These seftings should be about right for nor- mal household refrigerator usage.
The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments.
lThen adjust the Freezer Control if needed.
|
| CONDITION: | REASON: |
|
|
| RECOMMENDED |
| ||
|
|
|
|
| CONTROL SETTINGS: |
| ||||
|
| If Refrigerator | Door | opened | often | Refrigerator | : | |||
|
| Section is | Large | amount of food added | Freezer | |||||
|
| TOO WARM | Room temperature | too warm |
|
| ||||
|
| If Freezer | Door | opened | often | Refrigerator | 3 | |||
|
| Section is | Large | amount of food added | Freezer | A | ||||
|
| TOO WARM | Very cold | room temperature |
|
| ||||
QUESTIONS? |
| (can’t | cycle | often | enough] |
|
| |||
call | your | If Refrigerator | Controls | not | set correctly | Refrigerator | 2 | |||
for your | conditions |
| Freezer | B | ||||||
service | TOO COLD |
|
|
|
|
|
|
|
| |
assistance | If ICE isn’t | Heavy ice | usage |
| Refrigerator | 3 | ||||
telephone |
| |||||||||
number | MADE FASTENOUGH | Very cold | room temperature | Freezer | A | |||||
(page | 14I. |
| (can’t | cycle | often | enough] |
|
| ||
|
|
|
|
|
|
|
|
|
If BOTHSECTIONS are TOO WARM
Door | opened | often | Refrigerator | 4 |
Large | amount | of food added | Freezer | B |
Very warm or very cold |
|
| ||
room | temperatures |
|
|
Power Saving Control...
The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
POWERSAVER
1.Use the “CONSUMESLESSENERGY”setting when humidity is low.
2.Use the “REDUCESEXTERIORMOISTURE”setting if moisture forms on the outside of the refrigerator.