WER SAVER
PGY . REmIcES EXTERIOR M0lS1URE.
Refrigerator Control Light Switch Freezer Controt
Setting the controls.. .
Controls for the refrigerator and freezer ore in the
refrigerator. When the refrigerator is plugged in for
the first time...
I. Set the REFRIGERA-
TOR CONTROL to 3.
Glve the refrigerator time to cool down com-
pletely before adding food.
(This may take sev-
eral hours,]
These settings should be about right for normal
household refrigerator usage.
2. Set the FREEZER
CONTROL to B.
The controls will be set about right when milk or
uice is as cold as you like and when ice cream
s firm.
Changing the control settings . . .
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart below.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, if needed.
RECOMMENDED CONTROL
CONDITION : REASONS: SETTINGS:
Using your refrigerator J
If Refrigerator
Section is
TOOWARM
d If Freezer
Section is
TOO WARM
QUESTIONS?
Door opened often
Large amount of food added
Room temperature too worm
Door opened often
Large amount of food added
Very cold room temperature
Ican’t cvcle often enouahl
Refrigerator
Freezer
Refrigerator
Freezer
-ca” your lf Refrigerator
VOOL-LINER Section is
llvl
jervice
xsistance TOO COLD
>
‘nbnhnne
If ICE isn’t
number MADE FAST ENOUGH T ENOUGH
; -l-rl ,-
L”I lll”lb I I”1 >e’I c;wIeLIIy
Controls not set correctly
for your conditions for your conditions
Heavy ice usage Heavy ice usage
Very cold room temperature Very cold room temperature
I~wllyal”l”l
Refrigerator
Freezer Freezer
Refrigerator Refrigerator
Freezer Freezer
(page 11).
(can’t cycle often enc
If BOTH SECTIONS Door opened often Refrigerator 4
ore TOO WARM Large amount of food added Freezer B
Very warm 01 very cold
room temberatures
Power Saving Control.. .
The
Power Savlng Control
on the Control Con-
sole operates electric heaters around the door 1.
openings. These heaters help keep morsture from
fotming on the outside of the refrigerator. 2.
Use the “CdNSUMES LESS ENER ‘GY” setting whe
humidity is low. I
Use the “REDUCES EXTERIOR MOISTURE” setting
only if moisture forms on the outside of the
refrrgerator. F