Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 19.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:

REASON:

 

 

If Refrigerator

Door

opened

often

Section is

Large

amount

of food added

TOO WARM

Room temoerature

too warm

If Freezer

Door

opened

often

Section is

Large

amount

of food added

TOO WARM

Very

cold room temperature

 

(can’t

cycle often

enough)

RECOMMENDED CONTROL SElTINGS:

Refrigerator 6

FreezerD

Refrigerator

Freezerii

If Refrigerator

Controls

not set correctly

Refrigerator

2

Section is

for your

conditions

Freezer

A

TOO COLD

 

 

 

 

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS

are TOO WARM

Heavy ice usage

Very cold room temperature (can’t cycle often enough)

Door opened often

Large amount of food added Very warm or very cold room temperatures

Refrigerator

Freezeri

Refrigerator

Freezer:

Using the covered utility compartment

The utility compartment, at the top of the refrig- erator door, is designed to hold most 1-pound soft spread containers, sticks of butter or margarine, and other small, frequently-used

packages. Keeping small items, that are used on a regular basis, in this location will save you time and energy as you prepare snacks or meals.

Removing the drop-in door trim

The drop-in door trim can be removed for easier cleaning.

To remove trim:

1.Remove all items from the shelf.

2.Pull straight up at each end of the trim.

To replace trim:

1.Line up each end of the trim above the trim pocket opening in the door liner wall.

2.Push trim straight down until it stops.

3.Replace all items on the shelf.

8

Page 8
Image 8
Whirlpool ETl8YK Changing the control, Settings, Using the covered utility compartment, Removing the drop-in door trim