Using your freezer
Setting the temperature control...
To start, turn control to the middle of the dial This setting is designed to malntaln the temperature at or near 0°F [ ~ 17.8 “C]under normal operattng conditions.
The Power Saving Control...
operates electric heaters. These heaters help pre- vent moisture from forming on the outside of the freezer when humidity is high.
I, Use the OFF setting to save energy when humidity is low.
2.Use the ON setting only if moisture forms on the out- side of the freezer.
Removing and adjusting the top
freezer shelf...
To remove shelf:
1.Lift front, then back off supports.
2.Replace in reverse order.
To adjust shelf:
1 Remove shelf.
2.Remove supports by sliding upwards
3.Replace supports on desired level
4.Replace shelf.
Adjusting the freezer shelves...
To remove shelf:
I. Remove food from shelf.
2 Slide shelf straight out to stop.
3 Lift front
4.Slide the rest of the way out
To replace shelf:
I, Fit bock of shelf on top of gud es with wire bottom of guides
2.Lift front, then slide shelf until It clears tt stops
Adjusting the temperature control...
1 Turn control to higher number for colder temper- atures
2 Turn to lower number for less cold temperatures.
Cooling freezer first...
I. Allow freezerto cool 6 to 8 hours before filling with
frozen food.
2.Let it cool overnight before adding large amount of unfrozen food.
Note: When freezer IS first started, the compressor will run constantly until the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer door is opened
After the cabinet is cooled, the compressor WI/I turn ON and OFF as needed to keep the freezer at the proper temperature
