Using your freezer Setting the temperature control... Adjusting the temperature control...
To start, turn control to the middle of the dial This
setting IS designed to morntarn the temperature at
:lr near 0 F (~ 17 8 ‘C] under normal operatrng
::ondrtions
1 Turn control to higher number for colder temper-
atures
2 Turn to lower number for less cold temperatures.
Cooling freezer first...
1 Allow freezerto cool 6 to 8 hours before frlllng wrth
frozen food.
The Power Saving Control...
operates electrrc heaters. These heaters help pre-
vent morsture from forming on the outstde of the
freezer when hurnrdity is high
1 Use the OFF setting to save energy when humidrtv IS
low
? Use the ON setting only if moisture forms or the out-
side of the freezer
Removing and adjusting the top
freezer shelf...
To remove shelf:
1. Loft front, then back off supports
2 Replace in reverse order
To adjust shelf:
1 Remove shelf
2 Remove supp4s by slicing upwOrds
3 Replace supl;cxts on desired level
4 Replace shelf
Adjusting the freezer shelves...
To remove shelf:
1 Remove food from shelf
2 ,et It cool overnight before adurng large amount
of unfrozen food.
Note: ‘When freezer 1s firs? started, the compressor
sti~ll run constantly unttl the cabinet IS cooled It may
take IJP to 6 to 8 hours or longer, depending on room
temperature and the r,umber of times the freezer
door 1s opened
After the cabinet IS cooled, the compressor will
‘urn ‘:IN and OFF as needed to keep the freezer at
the proper temperature
stops
2
Slide shelf strc ght out to star>
S ,ift fron:
4
Slide the rest : r the way out
To replace shelf:
1 Fit bock of shelf on top of gurdes with wire stops on
bottom of gui; les
2 Loft front ther slide shelf until It clears the guide