
7.Remove the casters and fasteners from the box.
8.Locate and remove the caster brackets from the FeaturePak.
9.Using
10.Insert the
A
B
| C |
| D |
A. | C. |
B. Caster bracket | D. Caster |
11.Hold the head of the
12.Using a ¹⁄₂" socket wrench, remove the four unit bolts (two on each side) from the lower front and rear of the refrigerator.
NOTE: Do not remove leveling bolt.
Lower Front Corner
A
B
A. Leveling bolt (do not remove)
B. Unit bolt
13.Place the slot in the rear of the caster bracket over the unit hole in the rear of the refrigerator. Align the hole in the front of the caster bracket with the unit hole in the front of the refrigerator.
Lower Rear Corner
A
B
A. Rear unit hole
B. Caster bracket
14.Hold the bracket in place and insert the unit bolts into the front and rear unit holes and tighten.
NOTE: Do not overtighten the bolts.
15.Insert two of the
A
A. Caster bracket holes
16.Repeat steps
Complete the Installation
1.Lock the front casters.
NOTE: Locking the casters will help prevent the refrigerator from moving while it is being lifted.
2.Insert a small piece of cardboard between the caster brake and the floor. This will help prevent the brake from rubbing on the floor.
3.Stand the refrigerator upright.
4.Replace the base grille by placing the metal clips in the openings in the metal panel and rolling the grille downward until it snaps into place.
5.Unlock the casters and move the refrigerator into its final location.
6.Lock the casters.
7.Plug in refrigerator or reconnect power.
8