Whirlpool GDU4050XP, 119 Selecting a cycle, Heat DRY or AIR DRY?, To add a dish after starting

CYCLE CONTROL KNOB

Selecting a cycle

DUAL WASH Cycle

A double wash for heavilv soiled loads. Cycle time is about 65 minutes.

PRE-WASH PLUS NORMAL Cycle

For moderate to heavily soiled loads. Cycle time is about 60 minutes.

LOW ENERGY NORMAL Cycle

For normal, everyday soiled loads. [The Energy Guide Label data is based on this cycle.] Cycle time is about 55 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about10 minutes. Use AIR DRY only

HEAT DRY or AIR DRY?

If the HEAT DRY Optlon is selected, air in the dishwasher is heated during the “dry” part of the cycle.

If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps

To add a dish after starting

1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY NORMAL.

2.Push up on door latch to unlatch door and stop the cycle.

3. Open the doorand add the dish.

pm3pj

save energy, but dishes take longerto dry (over- night] and some water spotting may result. Some items (such as plasttcs) may need towel drying.

For best results, use a soltd rinse aid.

4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up.Thls helps reduce the amount of moisture that can

come from the vent when restarting the cycle.

5.Press in door to latch it. The dishwasher will start where it stopped.

9