MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, a “:” will blink on the display. Touch CANCEL to stop the blinking. If the “:” blinks on the display at any other time, a power failure has occurred. Touch CANCEL and reset the clock if needed.
If “RETRY” blinks on the display for 1 second, an invalid value has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use, the display shows the time of day or Timer countdown.
Progress Bar
The progress bar is a visual picture of the estimated running time of a cooking cycle. It will appear during Cook, Defrost, Reheat and Sensor functions. The lines in each of the segments will light from left to right as the time nears the end. When all 12 lines (all 3 segments) are lit, the cooking cycle is complete.
Number Codes
The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the charts in the “Cooking” and/or “Reheating” sections for additional information.
Start
The START pad begins any function. If not touched within
5 seconds after touching a pad, “START?” will appear on the display as a reminder. If not touched within 1 minute after touching a pad, the display will return to the time of day mode and the programmed function will be canceled.
If cooking is interrupted, touching START will resume the preset cycle (for
Add 30 Seconds
Cook time may be added in
Touching ADD 30 SEC. during a cook cycle will add 30 seconds of cook time at the current cook power.
Touching ADD 30 SEC. when the microwave oven is not in use, or after a cook cycle has ended, will start the microwave oven for 30 seconds of cook time at 100% cook power.
Cancel
The CANCEL pad stops most functions except for the Timer, Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle (for non- sensor functions only).
7
