MICROWAVE OVEN

CONTROL

Progress Bar

Display

When power is first supplied to the microwave oven, “PLEASE SET TIME OF DAY” scrolls 3 times, and then a “:” will appear on the display.

Any other time the above tex t scrolls, followed by a “:” on the display, a power failure has occurred. Touch OFF/CANCEL and reset the Clock if needed.

When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts.

If “RETRY” blinks on the display for one second, an invalid pad was touched. Retry your entry.

When the microwave oven is not in use, the display shows the time of day or Timer countdown.

The progress bar is a visual picture of the estimated running time of a cooking cycle. It will appear during COOK, JET DEFROST™ control, REHEAT and SENSOR ONE TOUCH control. The lines in each of the segments will light from left to right as the time nears the end. When all twelve lines (all three segments) are lit, the cooking cycle is completed.

Number Codes

The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the code charts in the “Cooking” and “Reheating” sections for additional information.

Start/Enter

The START/ENTER pad begins any function. If not touched within 5 seconds after touching a pad, “START?” will appear on the display as a reminder. If not touched within 5 minutes after touching a pad, the display will return to the time of day mode and the programmed function will be cancelled.

If cooking is interrupted, touching START/ENTER will resume the preset cycle.

Off/Cancel

The OFF/CANCEL pad stops most functions ex cept for the Timer, Control Lock and Demo Learning Mode.

The microwave oven will also turn off when the door is opened. Close the door and touch START/ENTER to resume the cycle.

JET START™ Feature

Touch JET START control to automatically start the microwave oven for a thirty-second cook time at 100% cooking power.

While the oven is operating, touch JET START control to add thirty seconds of cook time at the set cooking power.

After a cycle ends, touch JET START control to add thirty seconds of cook time at 100% cooking power.

Multiple thirty-second increments can be added any time by repeatedly touching JET START control.

7

Page 7
Image 7
Whirlpool GH8155XJ manual Microwave Oven Control