Whirlpool GH9185XL manual Pre-Set Cooking, Beverage, Cooking in Stages

Pre-Set Cooking

Times and cooking power have been preset for seven microwavable foods. Use the following chart as a guide.

FOOD	CODE	QUANTITY/
		INSTRUCTION
Canned Vegetables	1	1, 2, 3 or 4 cups
		(250, 500 or 750 mL, or 1 L)
*Fresh Vegetables	2	1 to 4 cups (250 mL to 1 L)/
(sensor)		Add 1 tbsp water per cup
		veg. Cover with plastic and
		ventilate.
*Frozen Vegetables	3	1 to 4 cups (250 mL to 1 L)/
(sensor)		Add 1 tbsp water per cup
		veg. Cover with plastic and
		ventilate.
*Rice (sensor)	4	.5 to 2 cups (125 mL to
		500 mL)
French Toast, frozen	5	1, 2, 3 or 4 pieces
**Bacon	6	1, 2, 3, 4, 5 or 6 pieces,
		average thickness
*Frozen Entrée	7	10 to 20 oz (285 to 570 g)/
(sensor)		Loosen, but do not remove
		plastic.

*Make sure the microwave oven has been plugged in for at least 2¹⁄₂ minutes. No quantity needs to be entered. The amount listed is the amount to cook.

**Differences in the amount of fat, meat, thickness, and curing process affect results. Average is 16 slices per pound.

To Use Pre-Set Cooking:

1.Touch COOK.

2.Touch number pad from chart

or

Touch COOK repeatedly to scroll through foods.

3.Touch number pads to enter quantity (for Canned Vegetables, French Toast and Bacon only).

The sensor will determine quantities and cook times for Fresh Vegetables, Frozen Vegetables, Rice and Frozen Entrée.

Doneness may be adjusted at this time by touching COOK POWER.

4.Touch JET START.

The display will count down the cook time.

When the cycle ends, “END” will appear in the display, 4 end- of-cycle tones will sound, and then reminder tones will sound every minute.

5.Touch OFF/CANCEL or open the door to clear the display and/or stop reminder tones.

Beverage

Beverages may be heated in the microwave oven by touching the BEVERAGE pad. One or two 8-oz. (250 mL) cups can be heated automatically using this function.

To Use BEVERAGE:

1.Touch BEVERAGE.

The display will show the setting for heating 1 cup.

2.Touch BEVERAGE a second time to heat 2 cups.

The microwave oven will start 5 seconds after the appropriate number of cups to be heated is selected. The display will count down the cook time.

If more or less time is required, touch COOK POWER before the oven starts cooking.

When the cycle ends, “END” will appear in the display, 4 end- of-cycle tones will sound, and then reminder tones will sound every minute.

3.Touch OFF/CANCEL or open the door to clear the display and/or stop reminder tones.

Cooking in Stages

The oven can be set to cook at different cooking powers for various lengths of time, up to three stages. Cook settings can be used in any order, except defrosting, which must be the first stage.

Sensor cooking cannot be done in stages.

To Cook in Stages:

1.Touch COOK TIME.

2.Touch number pads to enter length of time to cook during the first stage.

3.Touch COOK POWER.

4.Touch the number pad(s) using the Cooking Power chart to set the cooking power for the first cycle.

5.Repeat steps 1-4 for the second and third cycles.

6.Touch JET START.

The display will count down each of the cook times. A “1,” “2” or “3” will appear on the display during their respective stages.

When the cycle ends, “END” will appear in the display, 4 end- of-cycle tones will sound, and then reminder tones will sound every minute.

7.Touch OFF/CANCEL or open the door to clear the display and/or stop reminder tones.

The cook time and cooking power of the cycling stage can be changed after touching JET START without interrupting cooking.

To Change Cook Time: Touch COOK TIME. Use the number pads to enter the new cook time. Touch JET START.

To Change Cooking Power: Touch COOK POWER. Use the number pads to enter the new cooking power or repeatedly touch COOK POWER. Touch JET START.

12