Whirlpool GLT3057RB manual Troubleshooting, Control Panel, Porcelain-Coatedgrates And Caps

Models: GLT3057 GLT3057RB

1 20
Download 20 pages 2.22 Kb
Page 9
Image 9
CONTROL PANEL

CONTROL PANEL

Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.

Cleaning Method:

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

All Purpose Appliance Cleaner Part Number 31662 (not included):

See “Assistance or Service” section to order.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the cooktop, grates and caps are cool. These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Cleaning Method:

Nonabrasive plastic scrubbing pad and mildly abrasive cleanser:

Clean as soon as cooktop, grates and caps are cool.

Dishwasher (grates only, not caps): Use the most aggressive cycle.

Gas Grate & Drip Pan Cleaner Part Number 31617 (not included):

See “Assistance or Service” section to order.

SURFACE BURNERS

Sealed Burner models

See “Sealed Surface Burners” section.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

 

Surface burner makes popping noises

Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Surface burners will not operate

Is this the first time the surface burners have been used? Turn on any one of the surface burner knobs to release air from the gas lines.

Is the control knob set correctly? Push in knob before turning to a setting.

Are the burner ports clogged?

See “Sealed Surface Burners” section.

Surface burner flames are uneven, yellow and/or noisy

Are the burner ports clogged?

See “Sealed Surface Burners” section.

On models with caps, are the burner caps positioned properly?

See “Sealed Surface Burners” section.

Is propane gas being used?

The appliance may have been converted improperly. Contact a service technician or see “Assistance or Service” section.

Is the burner wet? Let it dry.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

Is the proper cookware being used? See “Cookware” section.

Is the control knob set to the proper heat level? See “Cooktop Controls” section.

Is the appliance level?

Level the appliance. See the Installation Instructions.

9

Page 9
Image 9
Whirlpool GLT3057 Troubleshooting, Control Panel, Porcelain-Coatedgrates And Caps, Surface Burners, Nothing will operate