Troubleshooting

3.Slowly push the drawer into the range until the drawer side rails engage with the gap in the drawer glides.

4.Once the drawer is fully engaged on both sides, slide the drawer back into the closed position.

NOTE: When you are removing and replacing the storage drawer, a slight push may be needed to move the drawer stop notch past the drawer glides.

A. Engage drawer glide.

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

■Is the power supply cord unplugged? Plug into a grounded outlet.

■Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

■Is the control knob set correctly? Push in knob before turning to a setting.

■On ceramic glass models, is the “Control Lock” set? See “Control Lock” section.

Excessive heat around cookware on cooktop

■Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Hot Surface indicator light stays on

■Does the Hot Surface indicator light stay on after control knob(s) have been turned off?

See “Cooktop Controls” section.

Cooktop cooking results not what expected

■Is the proper cookware being used? See “Cookware” section.

■Is the control knob set to the proper heat level? See “Cooktop Controls” section.

■Is the appliance level?

Level the appliance. See the Installation Instructions.

■Has a delay start been set? See “Timed Cooking” section.

■On some models, is the Control Lock set? See “Control Lock” section.

Oven temperature too high or too low

■Does the oven temperature calibration need adjustment? See “Oven Temperature Control” section.

■On some models, does the cooling fan run during BAKE, BROIL or CLEAN?

It is normal for the fan to automatically run when the oven is in use. This helps cool the electronic control.

Oven indicator lights flash

■Do the oven indicator lights flash?

See the “Display” and/or the “Oven Indicator Lights” section. If the indicator light(s) keeps flashing, call for service. See “Assistance or Service” section.

Display shows messages

■Is the display showing “PF” or a flashing time? There has been a power failure. Clear the display. See “Display(s)” section. On some models, reset the clock, if needed. See “Clock” section.

■Is the display showing a letter followed by a number? Depending on your model, press OFF/CANCEL, OFF or CANCEL/OFF to clear the display. See “Display(s)” section. If it reappears, call for service. See “Assistance or Service” section.

Self-Cleaning cycle will not operate

■Is the oven door open?

Close the oven door all the way.

■Has the function been entered? See “Self-Cleaning Cycle” section.

Oven will not operate

■Is the electronic oven control set correctly? See “Electronic Oven Control” section.

■On some models, has a delay start Self-Clean cycle been set?

See “Self-Cleaning Cycle” section.

■Has a delay start been set? See “Timed Cooking” section.

IES355RQ2 specifications

The Whirlpool IES355RQ2 is a top-of-the-line electric cooktop designed to offer a versatile and efficient cooking experience for modern kitchens. This model stands out due to its sleek design, user-friendly features, and advanced technology that cater to the needs of both aspiring home chefs and seasoned culinary professionals.

One of the main features of the IES355RQ2 is its smooth ceramic glass surface, which not only enhances aesthetics but also makes cleaning a breeze. The frameless design eliminates the presence of crevices where food particles can accumulate, allowing for quick wipe-downs after cooking. This cooktop boasts a generous cooking space that accommodates multiple pots and pans at once.

In terms of cooking performance, the IES355RQ2 is equipped with powerful radiant heating elements that provide consistent and reliable heat distribution. This ensures that meals are cooked evenly, reducing the risk of undercooked or overcooked dishes. Additionally, the cooktop features a variety of burner sizes, including a dual-element burner that offers flexibility for different cooking needs, from simmering delicate sauces to boiling pasta quickly.

One of the standout technologies incorporated into the IES355RQ2 is the individual burner controls that allow for precise temperature adjustments. Each burner is equipped with an easy-to-read control knob, giving users the ability to switch between high and low heat settings with ease. This level of control is essential for fine-tuning cooking processes and achieving desired results.

Safety is another critical aspect of the Whirlpool IES355RQ2. It comes with features like hot surface indicator lights that alert users when burners are active and remain hot even after being turned off. This makes it not only convenient but also reduces the risk of burns and accidents in the kitchen.

Moreover, the cooktop is designed to be compatible with various cookware materials, ensuring that users can maximize efficiency regardless of their kitchen setup. The sleek black finish gives the cooktop a modern look and allows it to blend seamlessly with various kitchen styles.

In summary, the Whirlpool IES355RQ2 is a remarkable electric cooktop that combines style, performance, and safety. With its smooth surface, powerful heating elements, precise controls, and safety features, it clearly meets the demands of contemporary cooking, making it an excellent addition to any kitchen. Whether you are searing steaks or simmering soups, the IES355RQ2 delivers an exceptional cooking experience.

Whirlpool IES355RQ2 manual Troubleshooting

Models: IES355RQ2