Whirlpool JT 366 manual Installation

Models: JT 366

1 24
Download 24 pages 7.36 Kb
Page 2
Image 2
INSTALLATION

INSTALLATION

PRIOR TO CONNECTING

CHECK THAT THE VOLTAGE on the rating

Manual backgroundManual background plate corresponds to the voltage in your home.

DO NOT REMOVE THE MICROWAVE INLET PROTECTION

PLATES located on the side of Manual backgroundManual backgroundManual background the oven cavity wall. They Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background prevent grease & food parti- Manual backgroundManual backgroundManual backgroundManual backgroundManual background cles from entering the mi- Manual backgroundManual backgroundManual backgroundManual backgroundManual background crowave inlet channels. Manual backgroundManual backgroundManual backgroundManual background

PLACE THE OVEN ON A STABLE, EVEN SUR-Manual background

FACE that is strong enough to hold Manual backgroundManual background the oven and the food uten- Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background sils you put in it. Use care Manual backgroundManual background

when handling.

THIS OVEN IS NOT INTENDED to be placed or

used on a working surface lower than 850 mm above the floor.

AFTER CONNECTING

POSITION THE OVEN AT A DISTANCE from other heat-

ing sources. For sufficient ventilation there must be a space of at least 20 cm above the oven. Ensure that the space underneath, above and around the oven is empty to allow for proper airflow. The microwave oven shall not be placed in a cabinet.

ENSURE THAT THE APPLIANCE IS NOT DAMAGED. Check

that the oven door closes firmly against the door support and that the internal door seal is not damaged. Empty the oven and clean the interior with a soft, damp cloth.

DO NOT OPERATE THIS APPLIANCE if it has a

Manual backgroundManual background damaged mains cord or plug, if it is not working properly, or if it has been dam- aged or dropped. Do not immerse the mains cord or plug in water. Keep the cord away from hot surfaces. Electrical shock, fire or other hazards may result.

WHEN THE APPLIANCE is first plugged in or after a power failure, the display is blank. If required, the oven can display a 24-hour digital Clock.

When the Clock function is not programmed the display will remain blank until the cooking time or the Timer is set.

THE OVEN CAN BE OPERATED ONLY if the oven door is

firmly closed.

POOR TELEVISION RECEPTION

and radio interference may Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background result if the oven is located Manual background close to a TV, radio or aerial.

THE EARTHING OF THIS APPLIANCE is compulso-

Manual backgroundManual background ry. The manufacturer will accept no re- sponsibility for injury to persons, ani- mals or damage to objects arising from the non-observance of this requirement.

The manufacturers are not liable for any problems caused by the user’s failure to ob- serve these instructions.

2

GB

Page 2
Image 2
Whirlpool JT 366 manual Installation