Whirlpool JT 366 manual r q wer r, Clock

CLOCK

WHEN THE APPLIANCE IS FIRST PLUGGED IN or after a power failure, the display is blank. If the clock is not set, the display will remain blank until the cooking time is set.

r

q

wer r

qPRESS THE CLOCK BUTTON (3 seconds) until the left-hand digits (hours) flicker.

wTURN THE ADJUST KNOB to set the hours and PRESS IT to confirm. (The right-hand digits (minutes) flicker.)

eTURN THE ADJUST KNOB to set the minutes.

rPRESS THE ADJUST KNOB OR CLOCK OR START BUTTON.

THE CLOCK IS SET and in operation.

IF YOU WISH TO REMOVE THE CLOCK from the display once it has been set, simply press the Clock button again for 3 seconds until the left hand digits (hours) flicker, then press the Stop button.

TO REINSTATE THE CLOCK, follow the above procedure.

NOTE: KEEP THE DOOR OPEN WHILE SETTING THE CLOCK. This gives you 10 minutes to complete the setting of the Clock. Otherwise, each step must be accomplished within 60 seconds.

8 GB