Guide to the refrigerator/freezer and ice/water dispenser control panel
Vacation
This function turns off the refrigerator compartment if you are going away for some time. To activate the function press button 
(yellow LED lights up).
T° disappears from the display and a green dot appears. To turn on the refrigerator compartment, press button 
again.
Important:
After activating this function remove perishable food from the refrigerator compartment and keep the door closed.
Freezer/
Refrigerator Door
Open Indicator
Light
The refrigerator or freezer door symbol lights up (green LED) when one or both of the doors are opened.
Alarms
In the event of an alarm, the acoustic alarm and indicator lights are activated.
To switch off the acoustic
alarm press button 
.
Freezer T° alarm
The acoustic alarm will sound and the red LED will blink, T° disappears from the display and two hyphens appear.
The alarm is activated when:
•The appliance is connected to the power supply for the first time or after prolonged disuse.
•The freezer compartment T° is too high.
•The quantity of foods loaded into the freezer exceeds that indicated on the data plate.
•The freezer door has been left open for a long time.
Power failure alarm
The maximum T° reached during a power failure blinks on the freezer display.
The red alarm LED lights up and the acoustic alarm sounds at the same time.
The alarm is activated when:
•A prolonged power failure takes place, causing the internal temperature of the freezer to increase to values that cannot guarantee safe storage of food.
To disable the alarm:
•Press the reset button 
.
•The display will show the preset temperature.
Note
Check the state of the food in both compartments before refreezing or using it!
Operation alarms
If the acoustic alarm sounds and the display shows letters such as ”CF”, contact the Whirlpool
30
