Guide to the refrigerator/freezer and ice/water dispenser control panel

 

 

Standby

 

When the standby function is

When the appliance is on

 

 

When button

is

activated, two green dots will

standby the light inside the

 

 

appear on both of the displays.

refrigerator compartment is off.

 

 

pressed, the appliance

 

 

To restore the previous setting,

Remember that this operation

 

 

switches to standby. This

 

 

carry out the same procedure

does not disconnect the

 

 

function deactivates both

 

 

until the previous temperatures

appliance from the power

 

 

the refrigerator and

 

 

appear on both of the displays.

supply.

 

 

freezer compartments.

 

 

 

 

 

 

 

 

 

 

 

 

Fast freezing

 

Freezer compartment

The set T° is stored and will

 

 

 

 

 

This function must be

display

automatically be restored even

 

 

 

 

after a power failure or if the

 

 

activated before freezing

Shows the freezer compartment

 

 

appliance is switched off by

 

 

fresh food. To activate the

 

 

temperature setting.

pressing the standby button.

 

 

function press the specific

 

 

 

 

button (yellow LED lights

T° selection limit:

from - 18°C, least cold

up). The function switches

temperature, to - 24°C coldest

off automatically after 24

temperature.

hours or manually by

 

pressing the button again.

 

 

 

Freezer compartment temperature selection and control

To change the internal temperature press buttons until the desired value is reached and shown on the display.

Refrigerator compartment display

Shows the refrigerator compartment temperature setting. T° selection limit: from + 2°C coldest temperature to + 6°C, warmest temperature.

The set T° is stored and will automatically be restored even after a power failure or if the appliance is switched off by pressing the standby button.

Refrigerator compartment temperature selection and control

To change the internal temperature press buttons until the desired value is reached and shown on the display.

Fast cooling

Switches on the Fast Cooling function and shows its operating status. Use this function to chill the fresh

food stored in the refrigerator compartment rapidly. The function switches on when the button (yellow LED) lights up and switches off automatically

after 6 hours or manually by pressing the button again.

29

Page 7
Image 7
Whirlpool KSDN 5061/A Standby, Fast freezing Freezer compartment, Display, Refrigerator compartment display, Fast cooling