7.Press the ENTER button to return to the menu and disconnect the cable of the color temperature sensor from the projector.
Note:
If color temperature adjustment is not correctly processed or if adjustment processing is interrupted in course by pressing the MENU button or for some other reason, the below message appears on the screen.
Quit
Press "ENTER" to exit
Also, adjustment processing can be interrupted by pressing the MENU button.
8.Reposition the picture on the screen (up, down, left and
right) using the “Lens shift” feature on the Config menu. (See “Configuration” ☞ pg. 32.)
❖Color Temperature Sensor Protection
If no operations are performed for approximately 10 minutes from the moment color temperature adjustment processing ends, power to the projector shuts off automatically in order to protect the color temperature sensor. If power is shut off to protect the color temperature sensor, do the following.
•If the WARNING indicator is not lit
When color temperature adjustment ends successfully and the sensor protection feature trips, the projector goes on standby. As usual, activate power by pressing either the POWER ON button on the remote control or the POWER button on the projector.
•If the WARNING indicator is lit
If color temperature adjustment does not end successfully and the sensor protection feature trips, the projector’s WARNING and STANDBY indicators light simultaneously to indicate the error mode. Set the ON/OFF switch in the off position, unplug the AC power cable and then plug it back in. Then, set the ON/OFF switch in the on position and press either the POWER ON button on the remote control or the POWER button on the projector to reactivate power.
Lens Cleaning
If the lens becomes dirty or smudged, clean it with a soft dry cloth and an optical lens cleaner that is approved for eyeglasses or cameras. Do not use a dampened cloth, detergent, thinner or other harsh substances. These substances may damage the lens or leave stains. Do not clean the lens while the lamp is on. Always shut off power to the projector and wait at least 60 minutes before cleaning the lens.
Replacement Parts
If replacement parts are needed, contact your nearest Marantz dealer or authorized service center. Use only replacement parts specified by Marantz. Unauthorized substitutes may result in fire, electric shock or other hazards, and will forfeit warranted servicing.
Optional Accessories
• Lamp unit | : LU10VPS1 |
ENGLISH
39
