Setting
You can make the following settings.
Menu |
| Standard 1 |
Picture Adjust | Lamp Mode | High |
Setting | High Bright | Off |
System | Aspect | Full |
Display | OSD Position | 16:9 |
Config | DVI CSC | RGB |
Trigger 2 | VCR Mode | Off |
Preset | Cinema | Auto |
| Black Setup | 0 IRE |
Lamp Mode | High / Low |
High Bright | On, Off |
| High Bright On : Display brightest image. |
Aspect | Full, Normal, Zoom, Through |
OSD Position | 16:9, 4:3, Through |
DVI | RGB, YPBPR, YCBCR |
| Sets the color space conversion for DVI input. |
| RGB: Does not convert color space. |
| YPBPR: Suitable for high definition TV signals such |
| as 720p and 1080i. |
| YCBCR: Suitable for signals such as 480p and |
| 576p. |
VCR Mode | On, Off |
Cinema | Auto, Off |
| Cinema mode: |
Black Setup | 0IRE, 7.5IRE |
| /NORMAL, EXPAND (For DVI input) |
| Adjusts black level to the source. |
|
|
ENGLISH
–OSD Position
You can select from three positions: 16:9, 4:3 and Through.
Menu |
| Standard 1 | Menu | Contrast | Standard 1 |
Picture Adjust | Contrast | 50 | Picture Adjust | 50 | |
Setting | Brightness | 44 | Setting | Brightness | 44 |
System | Coior | 58 | System | Coior | 58 |
Display | Sharpness | 7 | Display | Sharpness | 7 |
Config | Tint | 0 | Config | Tint | 0 |
Trigger 2 | Noise Reduction | 0 | Trigger 2 | Noise Reduction | 0 |
Preset | Color Temp. | 3 | Preset | Color Temp. | 3 |
| Fine Menu |
|
| Fine Menu |
|
|
|
|
|
|
| Menu |
| Standard 1 |
|
| Picture Adjust | Contrast | 50 |
|
| Setting | Brightness | 44 |
|
| System | Coior | 58 |
|
| Display | Sharpness | 7 |
|
| Config | Tint | 0 |
|
| Trigger 2 | Noise Reduction | 0 |
|
| Preset | Color Temp. | 3 |
|
|
| Fine Menu |
|
|
|
|
|
|
|
|
|
|
|
|
OSD position for 16:9 |
| OSD position for 4:3 |
| OSD position for Through |
|
|
|
|
|
–VCR Mode
On : Stabilizes the picture. Use to play back video or input TV signals of weak electromagnetic waves if the image is unstable when the mode is off.
Off : Normally use this mode.
❖How to Operate the Setting Menu
1.Select the desired menu item and press the 2 button. The setting item will appear on the screen.
2.Use the 3 and 4 buttons to set the item.
3.Press the 1 button to enter the setting and return to menu item selection.
| MENU |
| |
| PATTERN INPUT |
|
|
2 | ENTER |
|
|
ENTER |
| 2. | |
|
| ||
| 1,3 |
| 1, 3 |
| INPUT | ASPECT |
29
