Marantz Model VP-10S1 manual How to Operate the Config Menu, How to Operate the Trigger 2 Menu

–Reset All

Resets all settings to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select “Yes”, the following message appears on the screen.

Reset All ?

YesNo

Select “Yes” and press the ENTER button.

❖How to Operate the Config Menu

1.Select the desired menu item and press the 2 button. The setting item will appear on the screen.

2.Use the 3 and 4 buttons to set the item.

3.Press the 1 button to enter the setting and return to menu item selection.

	MENU	V-MUTE
	PATTERN INPUT
2	ENTER
	ENTER		2.
	1,3		1, 3
	INPUT	ASPECT

Trigger 2

You can turn the trigger signal output from the TRIG. 2 jack on (12 V output)/off (no output) for each of the aspect modes: Full, Normal, Zoom and Through. This trigger signal can be used to automatically match the screen aspect mode to projector operation, though it requires a powered dual aspect screen.

On: 12 V output

Off: No output

Menu		Standard 1
Picture Adjust	Full	On
Setting	Normal	On
System	Through	On
Display	Zoom	On
Config
Trigger 2
Preset

❖How to Operate the Trigger 2 Menu

1.Select the desired menu item and press the 2 button. The setting item will appear on the screen.

2.Use the 3 and 4 buttons to set the item.

3.Press the 1 button to enter the setting and return to menu item selection.

	MENU	V-MUTE
	PATTERN INPUT
2	ENTER
	ENTER		2.
	1,3		1, 3
	INPUT	ASPECT

ENGLISH

33