MAINTENANCE
Lamp Life and Replacement
❖Lamp Life
Pressing the INFO. button on the remote controller displays the below message on the screen.
The remaining lamp life appears on the second from last line.
Information |
| DYNA. | ZOOM | |
Video Input |
|
|
| |
Preset | User A1 | VIDEO | USER | THROUGH |
Cinema Mode | Auto |
|
|
|
Aspect | Full | RGB | CINEMA | INFO |
|
|
| ||
Trigger 2 | On | AUX |
|
|
Lamp Life | 927 Hours |
|
| |
LIGHT |
|
| ||
Total Hours | 3653 Hours |
|
| |
|
|
|
Note:
•The lamp lasts a maximum of 1,500 hours. Although every possible effort has gone into quality, the lamp can – though rarely - burn out after 1,000 hours of lighting. Therefore, it is recommended to replace the lamp promptly when lamp life falls under 500 hours. The lamp must not be used in excess of the maximum lamp life.
•This product is subjected to strict quality controls before shipping from the factory. The “Total Hours” item on the Information screen includes this checking time, therefore the “Total Hours” may not be “0” when the projector is used for the first time.
–When remaining lamp life drops below 100 hours and the projector is on, the below message with the remaining lamp life appears on the screen.
Warning
LampLife 100 Hours
–When remaining lamp life drops below 5 hours, the below message appears on the screen.
ENGLISH
Warning
LampLife 5 Hours
ON
Press the MENU button to clear the message from the screen.
POWER |
|
STANDBY |
|
MENU | INPUT |
| PATTERN |
ENTER
STANDBY | POWER ON |
PATTERN
PATT.
MENU
ENTER
–Approximately 2 minutes after the lamp reaches the end of its life, power to the projector shuts off and the WARNING indicator
lights up red. If the below message appeared on the screen before power shut off, promptly replace the lamp with a new one. (See “Lamp Unit Replacement” ☞ pg. 36.)
Warning
LampLife 0 Hours
35
