ENGLISH
Picture Adjust
You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory. This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.
❖For a video signal input, the following adjustments can be made.
Menu |
| Standard 1 |
Picture Adjust | Contrast | 50 |
Setting | Brightness | 44 |
System | Color | 58 |
Display | Sharpness | 7 |
Config | Tint | 0 |
Trigger 2 | Noise Reduction | 0 |
Preset | Color Temp. | 3 |
| Fine Menu |
|
Menu item | Adjustment range | |||||
Contrast | 0 |
|
|
|
| 100 |
|
|
|
| |||
| Weak |
|
| Strong | ||
Brightness | 0 |
|
|
| 100 | |
|
|
| ||||
| Dark |
|
|
|
| Bright |
Color | 0 |
|
|
| 100 | |
|
|
| ||||
| Light |
|
|
|
| Deep |
Sharpness | 0 |
|
| 31 | ||
|
| |||||
| Soft |
|
|
|
| Sharp |
Tint | R50 |
|
|
|
| G50 |
|
|
|
| |||
| Purple |
|
| Green | ||
Noise Reduction | 0 |
|
|
| 63 | |
|
|
| ||||
| Weak |
|
| Strong | ||
Color Temp. (Color Temperature) | 1 | 2 3 | 4 5 | |||
| Red |
|
|
|
| Blue |
|
|
|
|
| ||
Note:
•Some menu items cannot be adjusted depending on the input signal.
•If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3. See “Preset” (☞ pg. 34)
❖Contrast
Contrast50
❖Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
Color Temp. | 2 |
❖Adjusting Picture Quality
1.Select the desired menu item and press the 2 button. An adjustment bar appears on the screen.
2.Use the 1 and 2 buttons to adjust the item.
3.Press the 3 button to enter the setting and return to menu item selection.
MENU | ||
3. | 3. | |
PATTERN INPUT | ||
| ||
ENTER |
| |
| ENTER | |
1, 2 | 1, 2 | |
| ||
INPUT | ASPECT |
26
