Sharp XG-P20XU Adjusting the Projection Distance, Throw Distance, Standard Setup Front Projection

Models: XG-P20XU

1 83
Download 83 pages 38.26 Kb
Page 23
Image 23

Adjusting the Projection Distance

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted.

The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

A polarizing screen cannot be used with this projector.

Four optional lenses from Sharp are also available for specialized application. Please see your local Sharp Industrial LCD Products Dealer to details on all the lenses. (Refer to the lens operation manual when attaching a lens.) You can install the AN-W6EZ and AN-T6EZ optional lenses yourself. However, be sure to have service personnel install the AN-P9MX and AN-P48EZ optional lenses.

Throw Distance

The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.

Screen AN-P9MX 511 (1.8 m)

Throw distance ratio 1:0.9

AN-W6EZ

86–112(2.6–3.4 m)

Throw distance ratio 1:1.3–1.7

Standard

12–1511(3.7–4.9 m)

Throw distance ratio 1:1.8–2.4

AN-T6EZ

165–216(5.0–6.6 m)

Throw distance ratio 1:2.5–3.3

AN-P48EZ

3010–404(9.4–12.3 m)

Throw distance ratio 1:4.6–6.1

510 15 20 25 30 3540 (ft)

Standard Setup (Front Projection)

Place the projector at the required distance from the screen according to the

 

X

 

 

 

desired picture size. (See pages 24 to 28 .)

 

 

 

 

H

 

L

• Four optional lenses from Sharp are available for specialized application. Please see your local Sharp Industrial LCD Products Dealer for details on all the lenses.

Setup & Connections

NORMAL Mode (4:3)

3

4

: Screen size and Picture size (4:3)

WIDE Mode (16:9)

16

9

3

4

: Screen size and Picture size (16:9) : Signal mask area

E-22

Page 23
Image 23
Sharp XG-P20XU operation manual Adjusting the Projection Distance, Throw Distance, Standard Setup Front Projection