Replacing the Lamp
7 cover.Remove the lamp cage | 8 cage.Remove the lamp | 9 Insert the new lamp cage. |
Turn over the projector and | Remove the securing screws | Press the lamp cage firmly into |
loosen the user service screw | from the lamp cage. Hold the | the lamp cage compartment. |
that secures the lamp cage | lamp cage by the handle and | Fasten the securing screws. |
cover. Then slide the cover in | pull it towards you. |
|
the direction of the arrow. |
|
|
SecuringSecuring
screw 
screws
User service screw
10 Attachcover. the lamp cage
Slide the lamp cage cover in the direction of the arrow. Then tighten the user service screw.
&Troubleshooting
Maintenance
User service screw
Resetting the lamp timer
1 cord.Connect the power | 2 Reset the lamp timer. |
|
|
|
Plug the power cord into the AC | While pressing ƒ, © and | “LAMP 0000H” is displayed, | ||
socket of the projector. | ENTER on the projector, press | indicating that the lamp timer is | ||
| POWER ON on the projector. | reset. | ||
|
|
|
|
|
|
|
|
|
|
•Reset the lamp timer only after replacing the lamp.
