To select
2.WASH WATER TEMPERATURE
l
HOT WASH can be selected only in
the REGULAR HEAVY Cycle.Turn the
Control Knob so the pointer is on 14 or
12 minutes in the REGULAR HEAVY
Cycle.
All rinses use cold water. This
saves energy and helps pre-
vent wrinkles from setting into
fabrics.
To select a
3.WATER LEVEL
H IGH LEVEL WATER. The washer
will automatically fill to its highest
level...aboutl7.2 gallons (65.1 L)...
when the Control Knob points to a
FILL area.
l
WARM WASH can be selected in
the REGULAR HEAVY Cycle by moving
the pointer to 10 or 8 minutes in the
REGULAR HEAVY Cycle.
l
A warm wash is pre-set in the
SHORT Cycle. Turn the Control Knob
to point at 8 or 6 minutes in the
SHORT Cycle.
LOWER WATER LEVELS. Setting the
washer to fill with less water also sets
it for shorter wash time.
1. Push the Control Knob in and turn it
clockwise to a fill area in the cycle
you want.
2. Pull the Control Knob out; the
washer will start to fill.
3. When there is as much water as
you want in the washer, push IN the
Control Knob. SLOWLY turn the Con-
trol Knob clockwise past the fill area.
Pull out the knob to start the washer.
For all rinses, the washer fills to its
highest level with cold water.
5