Starting your washer
Before starting
your washer: 1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.

_ Select CYCLE and WASH TIME;

1. Start the washer

A.

Push in the Control Knob and
turn it to the right. It must be
pushed in and turned only
clockwise.
FILL AREA

B.

Stop on a number in the
cycle you want. The numbers
are minutes of wash time. The
drawing shows 6 minutes of
agitation in the REGULAR
HEAVY Cycle. NOTE: The
washer will fill only when the
knob points to a FILL area.

C.

Start the washer by pulling
out the Control Knob. After
filling, the washer will agitate
for the selected number of
minutes.

D.

To stop the washer at any
time push in the Control
Knob. To restart the washer,
pull out the Control Knob.
To set the controls for a rinse and
spin or a drain and spin, see page 8.