Using your Washer
Your automatic \Lail?er is easy +I: use To make ITeven easier reaa the following steps before starting your firs+ load
Start your washer after you put in
detergent, the load, and any other
laundry aids according to InformatIon on page 3 and page 6
1. Set the LOAD SIZE SELECTOR.
l Select the water level that matches the size of the load See poge 5 for more information
l To change the setting on the LOAD SIZE SELECTOR, first move it to RESET Then move it back to the setting you want
IMPORTANT For the best cleaning
sure the load has enough water for
2.Set the TEMPERATURE SELECTOR. l Match the wash and rinse water tem- peratures to the type of fabrics and soils being washed. [See the Instructions
under the washer IId and on page 14 lr your ioundry Guide )
l Be sure to use a cold rinse for PERMA~ NENT PRESS and KNITS GENTLE Cycles
3.Select a Cycle and Start the Washer.
l Push the Cycle Control Knob in and turn it to the right (clockwise)
l Stop when the pointer IS on the num Ser of mninutes of wushing you want In the cycle you want.
l Instructions for which cycles to use for each fabric type are under the lld
l To start the washer, pull the Cycle Control Knob out When the cycle IS over, the washer will stop.
l To stop the washer at any time during a cycle, push the Control Knob in. Pull It out to restart the washer l To change a setting, push the Con- trol Knob In to stop the washer Then turn the Control Knob to the right (clockwlse) to the setting you want Pull the knob out to start the washer
l Pages 8- 9 show what happens In each cycle
4
