Lint screen
Pull straight
out.
The lint screen is inside the dryer drum, on the back wall. Clean it before each load. A screen blocked by lint can increase drying time.
3. Roll lint off the |
| ||
screen | with | 1 | |
your | fingers. | ||
DO NOT rinse |
| ||
or wash | the |
| |
screen. | Wet | 11 | |
lint | is hard to | ||
remove. |
| Squeeze body; | |
|
|
| pull cover off. |
1.Use the finger holes to pull the lint 4. Replace the cover on the body of
screen | straight | out. |
|
|
| the lint | screen. |
| |
2. Lightly | squeeze | the | body, | as | 5. Push the lint | screen | straight back | ||
shown, | while | pulling | the | cover | off. | until | it clicks | into | place. |
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint should be removed at least every 2 to 3 years, or more often, depending on dryer usage.
Access Door /Funnel
lgnlter
ELECTRIC DRYERS | GAS DRYERS |
Cleaning should be done only by a qualified person.
WARNING:
l Avold electrical shock hazard - unplug power supply cord or turn off
electrlcal power.
l Avold InJury or damage - do not put hands Inslde cabinet.
l Make sure dryer Is cool.
1. Remove back panel (electric) or lower access panel [gas].
2. Avoid damaging wires, thermostats, funnel or igniter.
3. Remove lint from shaded area - see art - with a soff brush or vacuum cleaner.
4. Replace panel; reconnect and
9
