Lint | screen |
|
|
| |
|
| The | lint | screen | |
|
| is inside the | dryer | ||
|
| drum, | on | the | |
|
| back | wall. | Clean | |
|
| il before | each | ||
|
| load. | A screen | ||
|
| blocked | bv | lint | |
PIN | straight | can increase | |||
drying | time. |
| |||
| out. |
| |||
1.Use the finger holes to pull the lint screen straight out.
2.Lightly squeeze the body, as shown, while pulling the cover off.
3.Roll lint off the screen with your fingers. DO NOT rinse or wash the scree’n. Wet lint is hard to
remove. | Squeeze | body; |
| pull cover | off. |
4.Replace the cover on the body of the lint screen.
5.Push the lint screen straight back in until it clicks into place.
0
Lint
CAUTlON: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE,
PAM~D OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO FABRfCS AND DRYER PARTS, OR CREATE A CM& HAZARD.
removal
Lint can gather inside the dryer and create a fire hazard. This lint
should be removed every 2 to 3 years, or more often, depending on dryer usage.
ELECTRIC DRYERS | GAS DRYERS |
Cleaning should be done
WARNING:
l Avold electrical shock hazard - unplug power supply cord or turn off
electrical power.
l Avoid inJury or
l Make sure dryer is cool.
only by a qualified person.
1.Remove back panel (electric] or lower access door (gas).
2.Avoid damaging wires,
thermostats, funnel or igniter.
-
3. Remove lent from snaaea area - see
4. Replace panel; reconnect and
