Whirlpool LE4905XM manual Lint screen, Lint removal, Lint Screen Is inside, Back Wall

II I’

Lint screen

	The		lint	screen
	is inside the				dryer
	drum,		on	the
	back	wall.			Clean
	it betore			each
	toad.		A screen
	blocked			by	lint
Pull straight	can	increase
	drying		time
out.

1.Use the finger holes to pull the lint screen straight out.

2.Lightly squeeze the body, as shown, while pulling the cover off

3.Roll lint off the screen with your fingers. DO NOT rins or wash the screen. Wet lint is hard to

remove	Squeeze	body;
	pull cover	off.

4.Replace the cover on the body of the lint screen.

5.Push the lint screen straight back rn until it clicks into place:

CAUTION: RUNNING THE DRYER WITH THE LINT SCREEN LOOSE, DAMAGED OR MISSING CAN CAUSE OVERHEATING, DAMAGE TO FABRtCS AND DRYER PARTS. OR CREATE A FIRE NAZARD.

Lint removal

Lint can gather inside the dryer and create a fire hazard.This lint

should be removed every 2 to 3 years, or more otten, depending on dryer usage.

ELECTRIC DRYERS GAS DRYERS

Cleaning should be done

WARNING:

l Avoid electrical shock hazard - unplug power supply cord or turn off

electrical power.

l Avoid injury or damage - do not put hands inside cabinet.

l Make sure dryer is cool.

only by a qualified person.

1. Remove back panel [electric] or lower access door (gas).

2. Avoid damaging wires,

thermostats, funnel or igniter.

3.Remove lint from shaded area -

see art-with a soft brush or vacuum cleaner.

4.Replace panel; reconnect and re-level dryer.

7