Using dryer fabric softeners Dryer fabric softeners are recommended for l Remove fabric softener stains by wetting
reducing static cling and for softening the stains and rubbing them with liquid
fabrics. Always follow package instructions detergent or bar soap and rewash.
carefully. l Some fabric softeners can clog the lint
l Put one fabric softener sheet on top of the screen and slow drying. Use fabric soften-
load before starting the dryer. ers labeled as dryer safe.
Do not add a fabric softener
sheet after the drying cycle has
started. Instant heat can cause
the fabric softener to spot fabrics.
Saving energy l Use an Automatic cycle to dry most loads. l Shorten drying times by exhausting dryer
l Dry only full loads without overdrying. properly and cleaning exhaust duct and
l Avoid overloading dryer, adding wet items outside exhaust hood as needed.
to a partly dried load, or opening the door -Keep the lint screen clean.
unnecessarily. -Use your dryer in a room where room air
. Plan your laundry to dry one load after temperature is above 45°F (7°C).
another. A warm dryer shortens drying time. -Sot-t loads by fabric weight and type.
Vacation care 1. Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
Voltage requirements l Model LER3622D operates on 240 or 208
volt household current.
l Models LDR3822D and LGR3622D
operate on 120 volt household current.
NOTE: Electric dryers using 208 or 120 volts
require longer drying times than dryers using
240 volts. 240 or 208 volt
power supply
14