INSTALLATION REQUIREMENTS

ToolsandParts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Level

Drill with 1¼" (3.0 cm), ³⁄₈" (9.5 mm), and ⁵⁄₁₆" (7.9 mm) drill bits

Pencil

Wire stripper or utility knife

Tape measure or ruler

Pliers

Caulking gun and weatherproof caulking compound

Vent clamps

Jigsaw or keyhole saw

Flat-blade screwdriver

Metal snips

Phillips screwdriver

Metric hex key set

Parts needed

Home power supply cable

½" (12.7 mm) UL listed or CSA approved strain relief

3 UL listed wire connectors

For vented installations, you will also need:

1 wall or roof cap

Metal vent system

For non-vented (recirculating) installations, you will also need:

LocationRequirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the vent hood.

Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) Installation see “For Non- vented (recirculating) Installations Only” in “Connect Vent System” section. Recirculation Kit Part Number W10349327 is available from your dealer or an authorized parts distributor.

NOTE: This product will not comply with Energy Star specifications when installed as non-vented (recirculating) with the optional recirculation kit.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

Recirculation Kit Part Number W10349327 for non-vented (recirculating) installations only. See “Assistance or Service” section to order.

6" (15.2 cm) dia. round metal vent duct - length required is determined by ceiling height.

Parts supplied

Remove parts from packages. Check that all parts are included.

Hood canopy assembly with ventilator and light bulbs

 

installed

Vent transition with back draft dampers installed

Metal grease filter(s)

Vent cover support bracket

Mounting template

2-piece vent cover

2 - 3.5 x 9.5 mm screws

2

- 2.9 x 6.5 mm screws

6

- 5 x 45 mm mounting screws

2

- 8 x 40 mm wall anchors

4

- 10 x 50 mm wall anchors

7¹⁄₄"

(18.3 cm)

30" (76.2 cm) or

36" (91.4 cm)

8¹⁄₈"

(20.7 cm)

*28⁷⁄₈" (72.6 cm) min.

42¹⁄₁₆" (106.9 cm) max.

**28³⁄₈" (72.0 cm) min. 38" (96.6 cm) max.

14¹⁄₈"

(35.9 cm)

10" (25.4 cm)

20" (50.8 cm)

1¹ " (4.0 cm)

T20 Torx®adapter

®†TORX is a registered trademark of Saturn Fasteners, Inc.

*For non-vented (recirculating) installations

**For vented installations

4

Page 4
Image 4
Whirlpool LI3Y3B, W10320580B installation instructions Installation Requirements, ToolsandParts, LocationRequirements

LI3Y3B, W10320580B specifications

The Whirlpool LI3Y3B, model number W10320580B, is a notable addition to the brand’s range of refrigeration appliances, designed to meet the demands of modern households. This refrigerator boasts a blend of advanced technologies and user-friendly features, making it both efficient and convenient for everyday use.

One of the primary features of the LI3Y3B is its generous storage capacity, allowing users to store a significant amount of food and beverages without compromising on accessibility. The interior space is designed with adjustable shelves that can be configured to accommodate items of varying sizes, optimizing storage efficiency. This adaptability enhances user convenience and ensures that there is ample room for all essentials.

Whirlpool has incorporated a range of advanced cooling technologies into the LI3Y3B. The refrigerator is equipped with a multi-air flow system that evenly distributes cool air throughout the appliance, ensuring that every corner remains at the optimal temperature. This technology not only helps to preserve the freshness of food items, but also reduces the chances of spoilage, extending the lifespan of perishable goods.

The presence of an energy-efficient compressor in the LI3Y3B is another standout characteristic. This feature minimises energy consumption while maintaining consistent cooling performance. Households looking to reduce their energy bills will appreciate the refrigerator’s ability to operate efficiently without sacrificing cooling capabilities.

Additionally, the LI3Y3B comes with a user-friendly digital control panel that enables users to effortlessly adjust temperature settings and monitor the appliance’s performance. This feature empowers users to maintain their food at the ideal temperature, enhancing food preservation efforts.

The exterior design of the LI3Y3B is equally compelling, featuring a sleek and modern look that seamlessly blends with various kitchen styles. The durable finish is not only aesthetically pleasing but also resistant to fingerprints and smudges, ensuring that the refrigerator remains clean and attractive over time.

Overall, the Whirlpool LI3Y3B, W10320580B stands out in the refrigerator market with its combination of ample storage, advanced cooling technologies, energy efficiency, and modern design. Designed for practicality and convenience, it is an excellent option for families and individuals alike who seek reliability in their kitchen appliances. Choosing this refrigerator means investing in both quality and performance, ensuring that food stays fresh and easily accessible for all culinary needs.