TROUBLESHOOTING

COMMON WASHING PROBLEMS

Problem...

Cause...

Solution ...

Washer leaks

• Fill hoses not tight.

• Tighten hoses. See Installation

NOTE: After

• Fill hose washers not properly seated.

Instructions.

checking these,

• Reseat (reposition) washers. See

check household

• Drain hose clamp not properly installed

Installation Instructions.

plumbing.

• Clamp drain hose.

 

or is off.

 

•

•

•

•

Drain is clogged.

Tub moved forward during unloading, causing water to deflect off tub ring. Unit not level, causing water to deflect off tub ring.

Fill or spray rinses are deflecting off load. Washer is overloaded or load is unbalanced.

•

•

•

•

Unclog drain. Sink and standpipe must be able to handle 17 gallons (64 L) of water per minute.

Ensure tub is centered before starting washer.

Ensure front feet are installed and nuts are tightened. Level washer. Redistribute the load, or reduce load size.

Washer won’t

• Drain hose is clogged.

drain/spin

 

 

• Lid is open.

 

• End of drain hose more than

 

72 inches (183 cm) above floor.

•Unclog hose. See Installation Instructions for proper installation of drain hose.

•Close the lid.

•Lower drain hose.

•Too much detergent – excessive sudsing.

•Low voltage or using an extension cord.

•Use less detergent.

•Check electrical source or call electrician. Do not use extension cords.

 

 

Wet loads

• Wrong spin speed for load being washed.

• Choose a high spin speed.

 

 

 

• Cold rinses.

• Cold rinses leave loads wetter than

 

 

 

 

warm rinses. This is normal.

 

 

 

 

 

 

 

 

Washer continues

• Top of drain hose is lower than water

• Raise the drain hose. It must be

 

 

 

to fill/drain or

level in washer.

higher for proper operation.

 

 

cycle stuck

• Drain hose fits too tightly into standpipe.

• Adjust drain hose for loose yet

 

 

NOTE: Washer

 

secure fit. See Installation

 

 

pauses briefly

• Drain hose taped into standpipe.

Instructions.

 

 

throughout each

• Do not seal off drain hose with

 

 

cycle. This is normal.

 

tape. The hose needs an air gap.

 

 

 

 

 

 

 

Washer makes

• Load is unbalanced.

• Redistribute load.

 

 

 

noise

• Washer is not level.

• Level washer. Reset rear leveling

 

 

 

 

legs. See Installation Instructions.

 

 

 

• Nuts on front feet not tight.

• Tighten nuts.

 

 

 

• Yellow shipping strap with cotter pins

• See Installation Instructions.

 

 

 

not completely removed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

continued on next page

13

Page 12 Page 14
Page 13
Image 13
Whirlpool LSW9245EQ0 warranty Common Washing Problems
Page 12 Page 14

LSW9245EQ0 specifications

The Whirlpool LSW9245EQ0 is a top-loading washing machine that combines efficiency and effectiveness to meet the demands of modern laundry needs. With a capacity of 2.5 cubic feet, this model is spacious enough to handle medium-sized loads while still being compact for smaller spaces. Designed for durability and performance, the LSW9245EQ0 aims to provide users with a reliable laundry solution.

One of the standout features of the LSW9245EQ0 is its direct drive motor, which provides a robust and quiet washing experience. This motor is designed to minimize vibrations, ensuring that the machine operates smoothly and quietly, making it a suitable choice for homes where noise levels need to be kept to a minimum.

Another notable characteristic of the Whirlpool LSW9245EQ0 is its selection of wash cycles. The washing machine offers multiple cycles tailored to different fabric types and soil levels, which allows users to customize their wash according to their specific needs. Additionally, the machine incorporates a gentle agitation feature that protects delicate fabrics, helping to maintain their integrity over time.

The appliance also includes the convenience of an automatic load sensing feature, which adjusts water levels based on the size of the load, promoting water efficiency without compromising on performance. This technology not only conserves water but also helps reduce energy consumption, aligning with today’s eco-friendly standards.

Furthermore, the LSW9245EQ0 is equipped with a dual action agitator that ensures a thorough clean. This innovation allows for a better wash performance and optimal fabric care, as it gently moves clothes through the water and detergent, lifting stains effectively.

For added ease of use, the Whirlpool LSW9245EQ0 features an easy-to-use control panel with simple options for selecting wash settings. The large lid opening also enables users to load and unload laundry with minimal effort, adding to the overall convenience of this appliance.

Overall, the Whirlpool LSW9245EQ0 stands out for its combination of user-friendly features, advanced technology, and solid performance, making it an ideal choice for families and busy households looking for a dependable washing machine that gets the job done effectively. With its emphasis on durability and efficiency, it remains a popular option in the crowded laundry appliance market.
Top Page Image Contents