4.To replace grease Men, slide fflter In the frame slot on the front of the openlng.
Push ftlter upward and push to the rear to lock Into place.
8. Slide a new charcoal ftlter Into place. The ftlter should rest at the angle shown.
5.To replace charcoal filter: remove the vent cover mounting screws.
6.Tip the cover forward, then lift out to remove.
9.Slide the bottom of the vent cover Into place. Push the top until It snaps Into place. Replace the mounting screws.
10. Turn the power back on at the main power supply
7.Lift the back of the charcoal fllter. Slide the filter straight out.
11.DOnot operate the hood without the filters In place.
20
