![Install Trim Kit Frame](/images/new-backgrounds/74439/7443911x1.webp)
Install Trim Kit Frame
1.Position trim kit frame over the opening so that the lower tabs rest on the cutout floor, as shown.
3.Secure trim kit frame to cutout/cabinet by installing four long wood screws (painted) into the pilot holes drilled in Step 2 above.
A
B
C
A. Front of trim kit frame B. Tabs (upper and lower) C. Cutout/cabinet floor
2.Holding the trim kit frame in place, use 7/64" drill to drill four pilot holes into the front facing of the cutout/cabinet through the mounting hole guides in the upper and lower corners of the trim kit frame.
NOTES:
■The holes will be drilled downward from the top, and upward from the bottom at an angle of about 45°.
■To avoid damage to the trim kit frame, do not overtighten screws.
A B
C
Installation is now complete. Replace any loose items that have been removed from microwave oven cavity.
Save these Installation Instructions for future reference.
D
A. Trim kit frame | C. Long wood screw (4 - painted) |
B. Mounting hole guide | D. Cutout ceiling |
6