Whirlpool MT4110 manual Display, Start, JETSTARTFeature, Clock, Tones, Timer, ControlLock, Options

Models: MT4110

1 16
Download 16 pages 19.31 Kb
Page 7
Image 7
Display

Display

When power is first supplied to the microwave oven, “PLEASE SET TIME OF DAY” scrolls across the display, and then a “:” will appear in the display and 1 tone will sound.

If at any other time the above text scrolls, and is followed by a “:” in the display, a power failure has occurred. Touch OFF and reset the Clock if needed.

When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use, the display shows the time of day or Timer countdown.

Start

The START (START ENTER) pad begins any function.

If cooking is interrupted, touching START will resume the preset cycle.

Off

The OFF (OFF CANCEL) pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day.

The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle.

JETSTART™Feature

The JET START control to automatically start the microwave oven at 100% power for 30 seconds, and adds 30 seconds of cook time, up to 3 minutes, then 1 minute of cook time, up to

10 minutes with each additional touch of the control.

Time may be added in 30-second increments to any manual cooking cycle, at the current power level, by touching the JET START control during cooking.

Clock

This is a standard 12-hour clock (12:00-11:59).

To Set:

The microwave oven and Timer must be off.

1.Touch CLOCK.

2.Touch number pads to enter correct time of day.

3.Touch CLOCK.

The clock may be hidden using Options. See “Options” section.

Tones

Tones are audible signals that may be turned off using Options. See “Options” section. These tones indicate the following:

One tone

Valid entry (short tone)

Two tones

End of stage in multistage cooking

Control Lock active (short tones)

Three tones

Every minute after end-of-cycle tones, as reminder

Four tones

End of cycle

Five tones

During Defrost cycle, reminder to check, turn, rearrange, or separate food

Seven Tones

End of Timer countdown

Timer

The Timer can be set in minutes and seconds, up to 99 minutes 99 seconds, and counts down the set time.

NOTE: The Timer does not start or stop the microwave oven.

Cook functions may be used while the Timer is counting down. When the cook function is active in the display, touch TIMER SET/OFF to see the Timer countdown for 5 seconds.

To Set:

1.Touch TIMER SET/OFF.

2.Touch number pads to enter desired time.

3.Touch TIMER SET/OFF or START, or allow the Timer to start automatically after a brief delay.

When the set time ends, “TIMER END” will scroll across the display and the end-of-Timer tones will sound.

4.Touch TIMER SET/OFF while the Timer countdown is active in the display to cancel the Timer.

Touching the OFF pad will turn the microwave oven off if cooking during Timer function.

The time can be reset during the countdown by canceling Timer, then repeating the above steps.

ControlLock

The Control Lock shuts down the control panel pads to avoid unintended use of the microwave oven.

To Lock/Unlock Control: The microwave oven and Timer must be off. Touch and hold OFF for approximately 5 seconds until

1 tone sounds and “LOCKED” appears in the display. Repeat to unlock the control. Two tones will sound and the display will return to the time of day.

Options

Settings can be selected, and displays can be changed by using Options.

To Change Options: Touch OPTIONS, touch number pad to select the option, then follow the directions on the display.

Option

Pad

Setting

 

 

 

Sound (tones)

1

Turn on or off.

 

 

 

Clock

2

Turn on or off (hidden).

 

 

 

Scroll Speed

3

Change speed (slow, normal or fast).

 

 

 

Weight

4

Change to standard (lbs) or metric (kgs).

 

 

 

7

Page 7
Image 7
Whirlpool MT4110 manual Display, Start, JETSTARTFeature, Clock, Tones, Timer, ControlLock, Options, Setting