Setting the clock
When the oven is first plugged in, the Display
flashes 68:88. If the electric power ever goes off,
the Display will again flash all 6’s when the power
comes
back on.
You can cook without setting the clock, but the
Display will be blank after cooking.
1.
2.
3.
Touch STOP/CLEAR, then touch AUTO
START/CLOCK. The Display will show a “0”.
Touch Number Pads for the correct time of
day. The Display will show what numbers you
touched
In the order you touched them.
This
example shows 25 minutes after 3 o’clock.
Touch AUTO START/CLOCK. The Clock is
set.
ff you have touched in an incorrect time,
such as 12:65, “ERROR” will show on the
Display. Touch STOP/CLEAR, then touch
AUTO START/CLOCK and start over.
NOTE:
To m the clock, touch AUTO START/
CLOCK. The current time will show on the
Display. Continue to set the clock as shown
above.
Using the Minute Timer
Your microwave oven can be used as a kitchen
timer. Use the Minute Timer for timing up to
99 minutes, 99 seconds.
1.
Touch Number Pads for the minutes and
seconds you want. The Display will show the
numbers you touched
In the order you
touched them.
This example shows 3
minutes.
2. Touch TIMER/PAUSE. The Display will count
down to show you how much time is left.
During the countdown the oven will be dark
and the fan
will be off.
3. When the set time ends, a long tone will
sound. The Display will then show the time
of day.
NOTE:
l
To see the time of day while the Minute Timer is
counting down, touch AUTO START/CLOCK.
l If you want
to use other
Command Pads
while
the Minute Timer is counting down, touch
STOP/CLEAR to cancel the Minute Timer.
11