About the WUICK mOST” Cycle, Touch START

4.Touch START.

The QUICK DEFROST Indicator Light will stay on to show that the oven is in the Quick Defrost Cycle.

The Display counts down the time to show how much defrosting time is left

When the defrost time ends, “End” will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End” will remain on the Dis- play until door is opened or CANCEL is touched. The Display will then show the time of day.

Standing time or cooking automatically after defrosting

For best results, allow the food to stand for a while after defrosting. This helps equalize the temperature of the food to provide more even defrosting,

When COOK 1 follows QUICK DEFROST,the oven automatically provides a standing time equal to the time touched in for QUICK DEFROST.COOK 1will begin after the automatic standing time.

For cooklng automatically atter defrosttng:

I. Touch QUICK DEFROST and desired time.

2.Touch COOK I.

3.Touch numbers for desired cooking time.

4.Touch COOK POWER. (If you want to cook at high power, skip to step 6.)

5.Touch a number for desired Cook Power.

6.Touch START.

For a different standing ttme:

1.Touch QUICK DEFROST and desired time

2.Touch COOk 2.

3.Touch numbers for desired standing time.

4.Touch COOK POWER.

5.Touch “0”for zero Cook Power.

6.Touch in instructions for Cook 3, if desired.

7.Touch START.

When QUICK DEFROST is over, the oven will shut off. If Cook 1 has not been

programmed, 3 beeps will sound and the Display will count down the time for Cook 2 at zero Cook Power. If Cook 1 had not been programmed, the Display will count down and sound 2 beeps before Cook 1 will start. “End” will show on the Display and 4 beeps will sound when the standing time and cooking time is over.