Audible signals
Audible signals are available to guide you when setting and using your oven. (A programming tone will sound each time you touch a pad. Two beeps will sound between cycles. A reminder tone will sound every 30 seconds after cooking is done to remind you that something has been left in the oven. A
3 second tone signals the end of the Minute Timer function.] If you don’t hear a tone, it is because of incorrectly entered instructions or because the tones have been removed. For example, a tone will not sound if you touch a Number Pad before you touch a Command Pad.
To remove the programming tone and reminder tone:
l Open the door.
l Touch CANCEL twice, then touch START.
l Programming and reminder tones will be cancelled.
To remove all tones, except the Minute Timer signal:
l Open the door.
l Touch CANCEL twice, touch 0, then touch START.
l All audible tones (except Minute Timer Signal) will be cancelled.
To replace the tones:
l Repeat the steps above.
NOTE: If your electrlclty goes off, the audible above If you want to remove them again.
To replace the tones:
l Repeat the steps above.
signals will come back on. Repeat steps
Setting the clock
When the oven is first plugged in, the Clock/Display shows 88:88. If the electric
power ever goes off, the Clock4Iisplay will again show all 8’s when the power comes back on.
You can cook or use the Minute Timer without setting the clock, but the display will be blank after cooking.
DO THIS... | .I. | THIS HAPPENS... | mC.mj...._ | .I |
ar.. . . .. ,.,,..,,,. | ,.< | |||
|
|
| The Display will show a “0”and | |
|
|
| the colon will start to flash. The | |
|
|
| first Number Pad must be touched | |
|
|
| wlthin 5 seconds or the Display will | |
|
|
| go blank. Touch CLOCK SETagain | |
|
|
| and | continue. |
2.Touch Number Pads for the correct time of day.
3. Touch START.
The Display will show what numbers you touched in the order you touched them. This example shows
I 3:25
The colon will stop flashing. The Clock is set.
If you have touched in an incorrect time, such
NOTE: To reset the clock, touch CLOCK SET.The current time will show on the Display and the colon will flash. Contlnue to set the clock as shown above.
6