Straight power cord, Looped power cord

Straight power cord

1.Remove power plug and yellow strap from machine base to release the rear leveling system.

2.Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel.

3.ConMrm that the power cord restraint (A) and pin (B) are removed.

4.To remove the power cord from the cord restraint, push the power cord in, press TAB, and then pull the power cord out.

1.Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.

2.Check that two (2) cotter pins were removed with the shipping strap.

A.Powercord restraint

B.Pin

Image 5

Contents

Washersafety Tools and Parts Tools needed for installationParts needed not provided with washer Parts supplied You will need Location RequirementsDrainSystem BeforeYouStartRemoveShippingMaterials ElectricalRequirements Looped power cord Straight power cord Clear the water lines ConnectDrainHoseConnect theInletHoses Secure the Drain Hose Install the front leveling feetLevelthe Washer Check for leaks Slide the washer to its Mnal location CompleteInstallationSteps in Dnal location Outillageet pièces Outillage nécessaire pour l’installationPièces nécessaires non fournies avec la laveuse Pièces fournies Il vous faudra Exigencesd’emplacementSystème de vidange Avant de commencer Spéci,cations électriquesUne prise adéquatement mise à la terre En boucle Cordon d’alimentation en boucle Cordon d’alimentation droit Purger les canalisations d’eau Raccordementdu tuyau de vidangeRetirer le tuyau de vidange de la caisse de la laveuse Drain de plancher Raccorder les tuyaux d’arrivée d’eau à la laveuse Immobilisationdu tuyaude vidangeInspection-recherche des fuites Réglage de l’aplombde la laveuse SP PN W10200662B W10200331B Acheverl’installation