Oven Lights
The oven lights are standard
To Replace:
Before replacing, make sure the oven is off and cool.
1.Disconnect power.
2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.
3.Grasp under door handle and carefully close door as far as it will shut. Pull door out from the bottom.
3.Turn bulb counterclockwise to remove from socket.
4.Replace bulb and bulb cover by turning clockwise.
5.Reconnect power.
Oven Door
There is no need to remove the oven door for normal use. However, it can be done if necessary.
Before removing or replacing, make sure all controls are off and the oven is cool. The oven door is heavy. Use both hands, do not lift or carry the door by the handle and another person to help is suggested. Use care not to damage the outer finish.
To Remove:
1.Open the oven door all the way.
2.Insert short end of door removal pins, included with the oven, into both hinge hangers. Two ⁵⁄₃₂ in. (4 mm) allen wrenches or two nails of similar diameter can be used if door removal pins have been misplaced. Do not remove the pins while the door is removed.
1
1. Insert small end of pin here
To Replace:
1.Make sure door removal pins have not been removed. Fit hinge arms into slots in frame. Push in at lower corner to ensure hinge arms are fully engaged.
2.Open the door completely and remove the door removal pins. Save them for future use.
3.Close oven door. If the door does not operate freely, repeat the process.
13
