-...
-
If You Need Assistance
Or Service
1. Before calling for assistance . . .
Is your water turned on?
•!! - Is the power cord plugged in?
•!l -
Have you blown a fuse or tripped the circuit breaker’?
If you need more help, check the chart below.
PROBLEM
Washer will not fill
CHECK THE FOLLOWING
Are both hot and cold water faucets open?
Are the water supply hoses kinked?
Is the Cycle Control Knob set and pulled out?
Washer does not spln Is the lid closed?
Washer stops durlng Washer pauses briefly at different times in each cycle. These
a
cyck
oauses are normal.
Washer flllr and dralns
wlthout runnlng
Washer drabs durlng
1 wash and rinse cycles,
or water siphons out
Is the Cycle Control Knob pointing to a number in the cycle?
Adjust the drain hose so that it is higher than the water level in the
washer.
20