Operating Your Washer
In This | Section | Paae |
|
|
|
| Paw | |||
|
|
|
|
|
|
|
|
| ||
Before starting | your | washer | T5 | 6electing a cycle | and | time | ............................. .6 | |||
Starting | or | stopping | your washer | .5 | Using | rinse and | spin | ....................................... | 7 | |
Selecting | a load | size | . ........................................ | 5 | What | happens in | each | cycle | ........................... 6 | |
Selectfng | temperatures | .6 |
|
|
|
|
| |||
Operating your washer properly assures maximum washing efficiency. This section gives you important information to help you to select a cycle, time, and temperature for your wash load.
Before starting your washer
Add measured detergent. Then place a sorted load in the washer before starting. See page 11 for additional ‘Before you wash” information.
Starting your washer:
1.Push in the Cycle Control Knob and turn it clockwise. Stop when the indicator on the knob’s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time.
2.Select a load size and water temperatures, if neccessary.
3.Pull out the Cycle Control Knob.
Stopplng and restatilng your washer:
l
l
To stop the washer at any time, push in the Cycle Control Knob.
To restart the washer, close the lid (if neces- sarv) and pull out the Cvcle Control Knob.
Selecting a load size
Position the Load Size Selector at the setting that corresponds to the size load you want to wash.
Select a load size based upon the size of the load and the fabric you are washing. See page 11 for additional loading information.
To change the load size setting after the washer has started to fill, move the Selector to the desired new setting.
5
