What happens in each
When the Cycle Control Knob is set to a number and pulled out, the washer fills to the selected load size with the selected water temperature before agitation and timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitation starts, the knob turns clockwise until it points to OFF and the cycle ends.
The washer pauses brldly throughout each cycle. These pauses are normal for washer operation.
Regular and Short cycles
Fill to selected load size
Wash selected time
Spin
Fill
Rinse
Spin
cycle
Permanent Press cycle
Fill to selected load size
Wash selected time
Fill to selected load size
Brief agitation
Spin
Fill
Rinse
Spin
8