To disconnect washer: |
|
1. Unplug the electrical power cord and put it | Locking |
back in its storage area. |
|
2.Turn the water faucet off.
3.Press the red water flow button to release the water pressure.
4.Move the locking collar down and pull the hose connector down to disengage from the faucet adapter.
5. | Drain water from the hoses through the | button | connector |
| hose connector. |
|
|
6. | Hang the hoses on the storage rack. |
|
|
Portable two-faucet connections
If you have two separate water connections, your washer can be connected to both the hot and cold water faucets using Kit #3430190. This kit can be purchased from your Whirlpool Dealer.
Connecting the washer:
1.Connect the hot and cold water inlet hoses to the hot and cold faucets.
2.Secure the drain hose to the sink or standpipe.
3.Slowly turn the water faucets on all the way.
4.Plug the power cord into a
To disconnect the washer:
1.Unplug power cord and return it to the storage area.
2.Turn water faucets off.
3.Disconnect the drain and water supply hoses. Hang them on the storage rack.
6
