![Using Your Refkigerator](/images/new-backgrounds/74674/746747x1.webp)
Using Your Refkigerator
Setting the controls
Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time:
1.Set the Refrigerator Control to 3.
2.Set the Freezer Control to B.
R&igerat0r control
Condition
Refrigerator section
TOO WARM
Freezer section
TOO WARM
Both sections
TOO WARM
Refrigerator section
TOO COLD
Ice is not made fast enough
3.Let the refrigerator and freezer compartments get cold for several hours before adding food.
4.When the refrigerator keeps milk or juice as oold as you like and the freezer compartment keeps ice cream firm, the settings are correct for your household.
mttd01 moisture control
Check if
8 Door is opened often.
. Large amount of food added.
.
8 Door is opened often.
. Large amount of food added.
.
8 Door is opened often.
lLarge amount of food added.
8
8 Controls not set correctly.
8 Heavy ice usage.
m Very cold room temperature (freezer can’t cycle often enough).
Changing control settings
1.Adjust the Refrigerator Control according to the settings listed in the chsrt below.
2.Wait 24 hours or more before making additional adjustments to the Refrigerator Control or adjusting the Freezer ControL
mm~ control
Set control settina
Refrigerator 4
Freezer B
Refrigerator 3
Freezer Between
BandC
Refrigerator
Freezer ;
Refrigerator 4
Freezer Between
BandC
Refrigerator 3
Freezer Between
BandC
Exterior moisture control
The Exterior Moisture Control operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.
1.Use the OFF setting when humidity is low.
2.Use the ON setting if moisture forms on the outside of the refrigerator.
Page 4
fd.d.~it~g refrigerator
Shelves can be adjusted to match the way you use your refrigerator.
To remove shelf:
1.Removefood from shelf.
2.Tilt up at front.
3.Lift up at back.
4.Pull shelf straight out.
To replace shelf:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slots.
3.Lower front of shelf into position.