No Heat/Fluff or

Air Cycle

(on some models)

Use the No Heat/Fluff or Air cycle to fluff or a r dry bedding, plastic tablecloths, foam pi - lows, sneakers, etc. See the Warning and

the chart on page 10 for more information about this unheated cycle.

NOTE: If your model does not have a No Heat/ Fluff or Air cycle, line dry heat-sensitive items.

Damp Dry Cycle

(on some models)

Use the Damp Dry cycle to dry items to damp level or to dry items that do not re- quire an entire drying cycle. Two examples are heavy cottons, such

as jeans, which you co not want to become stiff, or cotton clothes which are easier to press when damp.

Wrinkle Free

(on some models)

The Wrinkle Free cycle removes wrinkles from clothes that have been packed in a suitcase or closet, or from items not removed from the dryer at the end of a cycle. As

soon as the dryer stops, fold or put the items on hangers.

WRINKLE

PREVENT”

Feature

(on some models)

When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. The

WRINKLE PREVENT

feature tumbles the load without heat every few minutes up to 45 minutes after the cycle ends. This tumbling rearranges and fluffs the load to avoid wrinkles.

You do not have to set the Cycle Control Knob for the WRINKLE PREVENT feature. If you do not open the dryer door within a few minutes after the cycle stops, the WRINKLE PREVENT feature takes over to protect the load.

A signal sounds every few minutes when WRINKLE PREVENT is running. The signal and cycle stop when you open the dryer door.

Understanding the End-of-Cycle signal

(on some models)

The dryer sounds a signal to let you know when the cycle

is finished. The signal is helpful when you are drying permanent press, synthetics,

and other items that should be removed from the dryer as soon as it stops.

The signal is not adjustable and cannot be turned off.

8

Page 8
Image 8
Whirlpool REL3612BW2 warranty Understanding the End-of-Cycle signal, On some models, Wrinkle Prevent