Removing accumulated
Lint can gather inside the dryer and be a fuel for fire. Lint should be removed every two to three years, or more often, depending on dryer usage. Cleaning should be done by a qualified person. If you have any questions or comments, please call our Consumer Assistance Center at
For all electric dryers, or gas dryers which have a lower front access panel
NOTE: See page 17 if your dryer is gas and has a full front panel.
1.Unplug the power supply cord or turn off the electrical power.
2.Remove back panel (electric) or lower front access panel (gas). See the Installa- tion Instructions.
3.Remove lint from shaded area in illustra- tion with a soft brush or vacuum cleaner. Avoid damaging wires, thermostats (electric), funnel (gas), or ignitor (gas).
4.Replace panel.
5.Reconnect and level dryer again, if necessary.
lint
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
Thermostats Heater Heat element
h box terminals
Electric dryer with back panel removed
Gas dryer with lower front
access panel removed
16
