3.If your dryer has a Temperature Selector, set it to the desired setting (see page 10).

4. Push the Start Button.

NOTE: Your dryer stops automatically when a cycle ends.

Stopping/restarting your dryer

You can stop your dryer anytime during a cycle.

To stop the dryer, either:

l Open the dryer door.

OR 011Turn the Cycle Control Knob

l

q to off.

on

NOTE: The Cycle Control Knob should point to an Off area when the dryer is not in use.

To restart the dryer:

1.Close the door.

2.Select a new cycle and temperature (if desired).

3.Push the Start Button.

Selecting the right cycle and setting

The following pages describe the cycles

on your dryer. Refer to the charts on pages 1O-l 1 for help in selecting drying cycles.

Drying guidelines

l Always follow care label directions when they are available.

lThe last few minutes of all cycles are without heat to make the load cooler to handle.

l To help reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is especially important for permanent press, knits, and synthetic fabrics.

l Overdrying can cause shrinkage, static cling, and damage to some fabrics.

lRefer to pages 18-21 for information about:

-sorting clothes for drying

-choosing load sizes

-drying tips

-using dryer fabric softener sheets

-saving energy

-drying special-care items.

continued on next page

7

Page 7
Image 7
Whirlpool REX3615EW0 warranty Stopping/restarting your dryer, Selecting the right cycle and setting, Drying guidelines