Whirlpool RF306BXP manual Using the surface units, Surface Unit Indicators, Signal light, I I’

I I I’

OVEN TEMPERATURE OVEN

CONTROLSELECTOR

OVEN SlGilAL	RIGHT REAR	RIGHT FRONT\
LIGHT	CONTROL KNOB	CONTROL KNOB

Using the surface units

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI

Surface Unit Indicators

The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.

Signal light

One of the signal lights will glow when a surface unit is on.

Until you get used to the settings, use the following as a gulde. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use	HI to start		Use MED-HI			Use MED			Use MED-LO
foods		cook-	to	hold	a	for gravy,			to keep	food
ing;	to	bring	rapid		boil; to	puddings			cooking	after
liquids		to a	fry	chicken		and	icing;	to	starting	it
boil.			or	pancakes.		cook	large		on a higher
						amounts		of	zietting.
						vegetables.

CAUTION: The use of the HI sefflng for long periods of tlme can damage surface units and dlscobr chrome reflector bowls. Start cooklng on HI and turn oonhol down to con- tlnue cooklng.

I

Use LO to keep food warm until ready to serve. Set the heat higher or lower

. within the LO band to keep food at the temperature you want.